Products
Home > Products > Offshore > General lighting > Ten mile LED signal lanternTen mile LED signal lantern
IML 250
The IML 250 is a ten-mile, advanced LED beacon. The light source comprises high intensity LEDS with precision reflectors and horizontal scattering lenses, which provide consistent horizontal divergence. Housing and top are painted with two layers of high impact polyester powder (signal grey). Provisions are made for air pressure equalisation and to prevent moisture from entering the casing.
For synchronising additional lanterns, the flasher has hard-wired input/output connections. The lantern can synchronise with the ITO sync GPS receiver. Compared to conventional signal lanterns, this beacon has low maintenance costs, affords excellent emitted light intensity with regards to power consumption, offers LED long life expectancy and is highly reliable.
specifications
Application | : Offshore platforms, landfall beacons, harbour lights |
LLens material/ type | : Acrylic type PMMA250 |
Lantern housing | : Marine grade aluminium |
Birdspike | : Polyethylene |
LED type | : High intensity, red, green, orange and white |
Life exepectancy | : Approx. 100,000 hours |
Flasher | : Infrared remote control for setting LED current (5 metre range) |
and the 221 pre-programmed IALA flash codes. Daylight sensor | |
can be field set. | |
Electrical parameters | : Battery voltage and day/night switching point can be read |
Connection | : Screw terminal block |
Cable entry | : PG 16 cable gland |
Daylight switch | : Internally placed |
Horizontal spread | : 360 degrees |
Vertical divergence | : > 2.5 degrees at 10% of I max |
Maximum intensity | : 2,400 candela with one LED array |
Voltage range | : 12-34 volt DC |
Protection class | : IP68 (design) |
Mounting | : 4 holes of 15mm on a 200 mm pitch circle |
Weight | : 6.7 kg |