Products

Home > Products > Aton > Marine lanterns > Three mile LED beacon

Three mile LED beacon

IML 85 AL LED

The IML 85 AL LED is a compact signal lantern with a single, high intensity LED light source. The light output can be programmed by infrared remote control. The base comprises marine grade aluminium, coated with two layers of high impact epoxy. The colour is the same as the emitted light. A membrane is incorporated for air pressure equalisation and to prevent moisture from entering the casing.

The lantern is reverse polarity protected. This compact light has a large vertical divergence, high emitted light intensity with regards to power consumption, LED long life expectancy and is highly reliable.

specifications

Application : Buoys, beacons
Lens material/type : Polycarbonate, U.V. stabilised
Housing : Aluminium ALMG3
Surface treatment : 2 layer polyester powder coating system
LED type : High intensity, red, green, yellow, white
Life expectancy : 100,000 hours
Flasher : Charge regulator function, sync option and infrared remote control
    for setting LED current and any of the 221 pre-programmed
    IALA flash codes.
Daylight sensor : Daylight sensor can be field set.
Electrical parameters : Battery voltage and day/night switching point can be read
Connection : 3 metre cable, 3x 0.75 mm standard
Daylight sensor : Internally placed
Horizontal spread : 360 degrees
Vertical divergence : 11 degrees at 10% of I0
Intensity : Depending on colour, max. 30 candela
Range : > 3 nautical miles
Voltage range : 8-30 volt DC, 230 volts AC option
Protection class : IP66
Mounting : 3 holes 7 mm on a 115 mm pitch circle
Weight : 1.4 kg

document

DATASHEET