ITO navaids logo

Products

Offshore products

Company

Contact

Inquiry

Datasheets

Home


3 Mile LED beacon type IML85 AL LED


The signal lantern IML 85 AL LED is a compact marine navigation lantern with a intensity of more than 20 candela. The lightsource is a single LED of high intensity and depending on which visibility is needed the light output can be programmed accordingly by means of a infrared remote control. Total vertical divergence is more than 11 degrees at 10% of the intensity at I0.

3 Mile LED beacon type IML85 AL LED The signal lantern base is made of marine grade aluminium painted with two layers of high impact epoxy coating, the color is the same as the emitted light.

In the lantern a membrane is incorporated for airpressure equalization and for blocking moisture to enter the lantern housing. The applied flasher has a: charge regulator function and infrared remote control for setting the led current, character setting (221 preprogrammed IALA flash codes), daylight sensor setpoints. Electrical parameters as ledcurrent setpoint, battery voltage, and day/night switchingpoint among others can be read. The marine lantern is reverse polarity protected.

The advantages of this marine light are especially the large vertical divergence, the intensity of the emitted light in regard to the power consumption, the long life expectancy of the LED and the very high reliability and small dimensions.


application:Bouys, beacons
type:IML85 AL LED
manufacturer:I.T.O. Vaarwegmarkering B.V.
lens material/type:Polycarbonat U.V. stabelized
lantern housing:Aluminium ALMG3
Surface treathment:2 layer polyester powder coating system
led type:High intensity, red, green, orange and clear
life expectancy:approx. 100.000 hours
flasher:Fully programmable
connection:1 meter cable 3x 1.5mm2
daylight sensor:Internally placed
remote control:Infrared
horizontal spread:360 degrees
vertical divergence:11 degrees at 10% of 10
Intensity:20 candela
Range:More than 3 nautical mile
voltage range8 volt - 30 volt DC
protection class:IP68
Mounting:3 holes of 7mm on 120mm pitch circle
weight:1.4 kg

Home Top