Medium range navigation lantern IML200 PU LED
The signal lantern IML 200 PU LED is a superb led beacon with advanced specifications.
The lantern is provided with a horizontal scattering lens providing a consistent horizontal divergence.
The lightsource is formed through horizontally placed LED's of high intensity and depending on which visibility is needed the light output can be programmed accordingly.
The lantern base is made of rugged polyurethane, the top of the lantern is made of marine grade aluminium, painted with two layers of high impact epoxy coating, the top color is the same as the emitted light.
In the lantern base a membrane is incorporated for airpressure equalization and for blocking moisture to enter the lanternhousing.
|
|
|
|
The applied flasher is the unique LKG2200 with: charge regulator function and remote control for setting the flashers led current, character setting (221 preprogrammed IALA flash codes),
daylight sensor set- points.
Electrical parameters as led current setpoint, battery voltage, and day/night switching point a.o. can be read.
These provisions make it possible for the lantern to be controlled from a distance.
For synchronizing more lanterns the flasher has a hard-wired input/output connection.
Power supply cable is made of marine-grade polyurethane, standard length is 3 mtrs. (3 wire 1,5 sq mm.)
As an Option the lantern can synchronize with the ITOsync GPS receiver.
In regards to conventional lanterns with lamp changers, the advantages are especially the large vertical divergence, the intensity of the emitted light in regard to the power consumption, the long life expectancy of the LED's, and the very high reliability .
|
Specifications:
| Application | :Bouys, landfall beacons, harbour lights |
| Type | :IML 200PU LED |
| Manufacturer | :I.T.O. Vaarwegmarkering B.V. |
| Lens material/type | :Acrylic type PMMA200 |
| Lanternbase | :Polyurethane |
| Lantern top | :Marine grade aluminium |
| Bird spike | :Stainless steel spring-type |
| Led type | :High intensity, red, green, yellow and white |
| Life expectancy | :Approx. 100.000 hours |
| Flasher | :LKG2200 |
| Connection | :PUR cable, standerd length 3 meters |
| Cable entry | :Cable gland PG13.5, brass, nickleplated |
| Daylight switch | :Internally placed |
| Remote control range | :10 meters |
| Horizontal spread | :360 degrees |
| Vertical divergence | :More then 24 degrees |
| Max. intensity | :Depending on setting |
| Visibility by T=0,74 | :Depending on range setting |
| Volt range | 12 volt - 30 volt DC |
| Protection class | :IP66 |
| Attachment | :4 holes of 15mm on 200mm |
| Weight | :3,8 kg |
|
|
|
|
Copyright© 2010 "I.T.O. Vaarwegmarkering b.v."
E-mail: info@itonavaids.com |
