Products
Offshore products
Company
Contact
Inquiry
Datasheets
Home
|
Aeronautical LED obstruction light type IOL 150
|
The light’s housing is made of marine grade gun metal with an high impact resistant lens cover.
In the base a membrane is incorporated for airpressure equalization and for blocking moisture to enter the lanternhousing.
In regards to conventional aeronautical obstruction lights the advantages of this light are especially the low maintenance cost, the very low power consumption which makes it very suitable for solar powered systems , the long life expectancy of the LED's, and the very high reliability.
|
|
The design of this aeronautical obstruction light is according to the following standards :
ICAO Annex 14 Vol.I, Chapter 6 type B Low Intensity Obstruction light, FAA L810 regulations,
ATEX ll 2G Ex emb ll T4 (zone 1).
|
| application | :Aeronautical obstruction light |
| type | :IOL 150 |
| manufacturer | :I.T.O. Vaarwegmarkering B.V. |
| lens material/type | :Acrylic type PMMA250 high impact resistant |
| lantern housing | :Marine grade gun metal |
| led type | :High intensity |
| life expectancy | :approx. 100.000 hours |
| Colour Chromaticity | :Red within ICAO specifications |
| connection | :Ex e terminals max. 4 mm2, external, internal M6 earth connection |
| Cable entry | :2 cable entries M25x1,5 |
| horizontal spread | :360 degrees |
| vertical divergence | :180 degrees |
| Effective Intensity | :32 candela |
| Character | :Fixed light |
| Power consumption | :10 Watt |
| voltage range | 110 – 254 VAC 50/60 Hz, option 12 volt - 34 volt DC |
| Operating temperature | :-55° + 40 degrees Celsius |
| protection class | :IP68 (design) |
| Attachment | :4 holes ø12 mm. on 200 mm |
| weight | :5.7 kg | |
|---|
|
